Grip & Stage Basics.
C-stands, sandbags, ladders, lights, cable and the calls everyone makes on a set or a sound stage. The Set Safety Quiz draws from this page.
What Should I Wear?
Shoes, gloves and clothes
- Closed-toe shoes on every set, on the stages and at the Equipment Room counter.
- Work gloves for hot lights, cable, sandbags and rigging.
- No loose clothing, scarves or dangling jewelry around stands and rigs.
How Do I Set a C-Stand Safely?
The rules
- Put the tallest leg under the load. The arm and whatever it holds go out over that leg.
- Set the grip head so the weight of the load turns the knuckle clockwise. Gravity then tightens it instead of loosening it.
- Raise the top riser first and the bottom riser last, so the thickest part carries the most weight.
- Sandbag the tallest leg on every stand, with the bag resting on the leg, not hanging from the stand.
- Mark any arm end at eye height with a tennis ball, tape or a flag so nobody walks into it.
Why it matters: A stand set the wrong way tips toward the load, and a loose knuckle can drop a flag or light onto someone.
Sandbags and Apple Boxes
Sandbags
- Bag every stand. Add more when it’s extended high or flying a flag, frame or light.
- Lift with your legs, not your back. Carry one bag per hand.
Apple boxes
- To stand or sit on one, set it flat.
- Don’t stack apple boxes more than two high for a person to stand on.
Flags, Frames and Wind
Big frames act like sails
- A 4x4 or larger frame catches wind like a sail. Bag it heavily and keep a hand on it outdoors.
- If the wind gusts, strike large frames and silks.
- See Weather for heat, wind and lightning.
Ladders
The rules
- Open an A-frame ladder all the way and lock the spreaders, on firm, level ground.
- Never stand on the top step, the top cap or the paint shelf.
- Keep three points of contact, and have someone foot the ladder. Use a spotter for anything above 6 feet.
- Never use a chair, cart or road case as a ladder.
- See Heights for rooftops, balconies and scaffolds.
Lights and Power
Hot lights
- Lights get hot enough to burn. Wear gloves, and let them cool before you strike or adjust them.
- Before changing a lamp or bulb, unplug the light and let it cool. Never touch a halogen bulb with bare hands.
- Use a safety cable on anything rigged overhead or on a high stand.
How much can one circuit take?
- A standard 20-amp household circuit carries about 2,400 watts at most. For lights running all day, plan for about 1,900 watts per circuit.
- Three 650-watt lights on one circuit is right at the limit. A fourth trips the breaker or overheats the wiring.
- Spread lights across circuits, and don’t daisy-chain power strips.
- Keep power away from water. Anything near water needs GFCI protection; see Water.
Cable
Keeping paths clear
- Run cable along walls and the edges of the set, never across doorways or walkways.
- If cable has to cross a path, use a cable mat or tape it flat and flag it.
- Coil cable over-under. Wrap and tie stingers before you return them.
Set Calls: Say It Out Loud
The calls everyone makes
- “Flashing!” before you turn on a light, so nobody looks into it.
- “Points!” when you carry something long or sharp, like a stand, pipe or arm, through people.
- “On your 6”, “Watch your back” or “Coming through” when you move behind someone.
- “Copy” to repeat back an instruction, so the person knows you heard it.
On the Sound Stages
Every time you use a stage
- When you arrive, find the exits, the fire extinguishers and the first aid kit.
- Keep exit doors, fire lanes and the electrical panel clear.
- No food or open drinks near gear.
- Brace set walls with jacks and sandbags before anyone works near them.
- Fog, haze, flame or smoke needs your instructor’s OK and a plan; see Fire, Fog & Special Effects.
- Leave the stage reset: stands collapsed, bags stacked, cable coiled, trash out.
Before you start a production plan:
Pass the Set Safety Quiz in your account. It covers this page, On Set and Gear, Rigs & Insurance.
Industry Safety Bulletins
What professional sets follow
The film industry’s own safety guidelines for this topic, written by the union and studio members of the Industry-Wide Labor-Management Safety Committee and published by Contract Services. They’re written for professional crews. Where our rules are stricter, ours win.
- #23: Portable Power Distribution and Electrical Equipment (PDF)
- #23B: Basic Electrical Safety on Location
- #23D: Common Tasks and the Protective Gear They Need
- #23E: Grounding Portable Generators
- #21: Clothing and Personal Protective Equipment (PDF)
- Checking Elevated Work Areas on Soundstages
- #25: Camera Cranes
Who to Ask
Equipment Room
Gear, checkouts and how to use it safely
Cinema cage, CC #102 · (323) 953-4000 ext. 2626
Your instructor
Approves your production number and safety plan, and decides what your class allows
Ask in class, in office hours or by email
Source: standard grip and electric practice, and LACC Cinema & Television stage and Equipment Room rules. Checked October 2026.
Your class syllabus and your instructor may set stricter rules, and theirs win.