Storage, Backups & Delivery.

Work out how much storage you need, back up footage, audio and the edit every day, and hand post everything it needs.

How Much Storage Do I Need?

Do the math

  1. Find your format’s data rate in the camera manual or the maker’s data calculator, in GB per minute (or Mbps ÷ 8 ÷ 1,000 × 60).
  2. Estimate the minutes you’ll actually record per day, including every take and reset. Student shoots often record 1 to 2 hours a day.
  3. Multiply by your shoot days to get the footage total. Add audio (small, but count it).
  4. Multiply by at least 3 copies. That’s how much drive space to have before day one.

Raw and low compression ratios can fill a 1 TB drive in a single day. If the number is too big, change the plan now: a higher compression ratio, a different codec, or fewer takes.

Cards on set

Have enough cards to keep shooting while one is being offloaded, and offload at every break. Label cards that are full and not yet backed up so nobody records over them.

What’s the Backup Plan?

Footage

  • One person owns offloads (a data wrangler or DIT on bigger shoots).
  • Use a copy tool that verifies each copy (checksums), not a drag-and-drop.
  • Two verified copies on two different drives before any card is reformatted. A third copy off site or in the cloud by the end of the shoot.

Audio

  • Record to both cards on the recorder if it has two.
  • Copy sound files with the footage at every offload, into the same day’s folder.
  • Keep the sound reports with them.

The edit

  • Keep the project file on a drive that’s backed up, not just the desktop.
  • Turn on autosave and project backups in your editing software.
  • Copy the project file to a second place at the end of every editing day, and to the cloud weekly.

Naming

Pick a folder structure before the shoot (for example: PROJECT / DAY01 / CAM_A / A001 and DAY01 / SOUND) and don’t rename camera files. Write it on the Tech Plan.

Do I Need Proxies?

What they are

Proxies are small, easy-to-edit copies of your footage. Edit with them, then relink to the originals for color and export. Make them if you shot raw, long-GOP or 4K on a computer that struggles. ProRes Proxy or DNxHR LB are common choices.

What Do I Deliver?

Plan delivery at the start

Look up the specs for where the film is going (festivals, platforms, your class) before you shoot, so the frame rate, resolution and audio match. Common deliverables:

  • A high-quality master (for example, ProRes 422 HQ) at your project resolution and frame rate.
  • A screener (H.264 or H.265) for online submissions.
  • A captions file (SRT).
  • Final mix and stems, stills and a poster.
  • A DCP only if a festival asks for one.

More on festival files in Post & Delivery.

Handoff

At picture lock, send the editor’s project, the locked cut, original media and notes to the colorist and mixer all at once. The Post Handoff Checklist lists what each person needs.

Sources: LACC Cinema & Television faculty and Equipment Room guidance; storage calculator presets from the Apple ProRes White Paper. Checked October 2026.

These are starting points for student productions, not rules for every camera. Check your camera’s manual, test before the shoot, and ask the Equipment Room or your instructor when something doesn’t look right.

We only store your name, email, and student status, and never share them.