Sound: On Set & In the Mix.
Plan production sound around the locations and the story, record it so the mixer has room to work, and plan the final mix before you shoot.
How Do I Plan Production Sound?
Scout by ear
Stand at each location at the time you’ll shoot and listen: traffic, planes, air conditioning, refrigerators, echo. Plan to turn things off, add blankets, or move the scene. Write problem locations on the Tech Plan.
Recorder and mics
- A separate recorder at 48 kHz, 24-bit WAV is the standard. 32-bit float recorders are much harder to clip.
- A boom on every take is the main dialogue track. Lavs add a backup or cover wide shots.
- Put each mic on its own track and write down who is on which.
- Record dialogue at a healthy level with room above it for sudden loud moments.
Sync
Use timecode if the camera and recorder support it, a clap slate either way, and scratch audio on the camera as a backup. Keep camera and sound reports so the editor can match every take.
Room tone and wild lines
Record 30 to 60 seconds of silence at every location with everyone still: that’s room tone, and the mixer uses it to smooth every cut. Record wild lines (dialogue without picture) when a take had noise over it.
What Happens in the Mix?
Plan it before the shoot
- Who will edit sound and who will mix, and how much time they need after picture lock.
- Mix format: stereo for most student films; 5.1 only if a venue needs it.
- Loudness target: festivals and platforms publish specs. Many broadcast and streaming specs in the US use about −24 LKFS; ask each festival what it wants.
- Music and sound effects you can license. See Music & Sound in the Producer’s Toolkit.
What to deliver
- A final stereo mix (and 5.1 if needed).
- Stems: dialogue, music and effects on separate files.
- An M&E (music and effects without dialogue) if the film might be dubbed or subtitled for sales.
Next: Storage, Backups & Delivery
Sources: LACC Cinema & Television faculty and Equipment Room guidance. Checked October 2026.
These are starting points for student productions, not rules for every camera. Check your camera’s manual, test before the shoot, and ask the Equipment Room or your instructor when something doesn’t look right.